Laminating systems
CTL1700H
A pneumatic, heated 1630 mm laminator with integrated cutting for high-throughput finishing.
Production demonstrations
Laminating in action
A demonstration of the CTL1700H laminating process.
- 1630 mm width
- 20 m/min maximum speed
- Hot and cold lamination
- Adjustable speed, nip gap, and pressure
- Pneumatic lift
- Infrared heating to 60°C
- Integrated cutting
- Dual-side footswitch operation
Overview
The CTL1700H is a full-automatic industrial laminator with pneumatic lift, infrared heating, and cutting. It supports hot and cold work, adjustable speed, nip gap, and pressure, and footswitch operation from either side. Its 20 m/min maximum speed and 28 mm media clearance are intended for demanding wide-format finishing.
Applications
- Wide-format graphics
- Mounting
- Protection films
- High-throughput finishing
Technical specifications
- Maximum lamination width
- 1630 mm / 64 in
- Maximum thickness
- 28 mm / 1.1 in
- Maximum speed
- 20 m/min
- Maximum temperature
- 60°C
- Warm-up time
- 5–10 min
- Heating
- Infrared
- Lift system
- Pneumatic
- Power input
- 1500 W
- Voltage
- 220 V
- Frequency
- 50/60 Hz
- Net weight
- 180 kg
- Overall dimensions (L × W × H)
- 2090 × 710 × 1235 mm
- Working environment
- 10–30°C, 30–60% humidity
Confirm voltage, options and final installation requirements with the technical team.
Choosing this system
Use a wide-format heated laminator for finishing compatible printed graphics. Compare the feeding method, material limits, working width and required cutting workflow before selecting H or M.
Published maxima are configuration-dependent; they do not describe every material, print mode or daily job.
Planning your installation
- Confirm assembled dimensions and access for delivery, operation and maintenance.
- Confirm the supplied electrical configuration and each separately powered accessory.
- Ask for the applicable installation instructions and revision before preparing the site.
- Allow the manufacturer-required front and rear material-feed access; confirm roll handling and the supplied support.
Confirm your supplied configuration
- Your quotation should identify the exact model and revision, with equipment marked as included, optional or customer-supplied.
- Confirm pneumatic supply requirements and whether the compressor and relevant accessories are included.
Consumables & maintenance
Use the approved model-specific operating instructions for maintenance, consumables and replacement parts. Request the correct document if it is not published; do not apply a procedure from a similar machine.
Documentation & source status
CTL1700H — reference manual PDFPDF · 1.48 MiB · English-language reference; revision not established; confirm before use. Read with the supplied machine-specific instructions.
Editorial source/context review: 16 October 2026. This date is not manufacturer approval. Confirm document revision and supplied configuration. Website planning notes are not operating instructions.