COLIBRI TECHNICS Talk to the team

Equipment planning guide

Choosing a printing and finishing workflow

Compare DTF widths, laminator controls and cutting formats, then define a sample job before choosing a configuration.

Colibri ULTIMA R620 printer and closed shaker in the approved clean workshop scene

DTF: A3, A2 or R620?

The published working widths are up to 300 mm for ULTIMA A3, up to 430 mm for A2 and 600 mm for R620. Select a width against the transfer layout and production volume, including film handling, curing and the heat-press stage.

A2 lists two i1600 heads. The R620 document distinguishes R622 with two i3200 A1 heads from R624 with four. Compare a named print mode and resolution, not the maximum speed of another configuration. The model pages show the documented modes.

Laminators: CTL1700H or CTL1700M?

Both list a 1630 mm working width and heated/cold lamination. H lists pneumatic lift, a 28 mm maximum thickness and 20 m/min maximum speed. M lists hand-crank lift, a 23 mm maximum thickness and 12 m/min maximum speed. These are machine limits, not a recommended setting for every film.

Confirm feed access, roll handling and H pneumatic equipment in the supplied quotation. The assembled dimensions differ: H 2090 × 710 × 1235 mm; M 2260 × 690 × 1180 mm. Do not use the working width as the installation footprint.

Cutters and laser systems are not interchangeable

A3+ Sheet Cutter is sheet-fed; CA-24 and DF-1260 are roll-fed cutting systems. Compare media format, registration workflow and a real job, not only carriage speed.

The published laser bed formats range from 600 × 400 mm to 1600 × 1000 mm; Marking 30 W lists a 100 × 100 mm working area. Select against the approved material, source and installed power. A laser power range is not proof that every listed power is included.

What should I send for a recommendation?

Send the substrate or fabric, finished dimensions, artwork, expected daily volume, required finish, available space and country of installation. Ask for a sample test and the exact equipment configuration used for it.

Do catalogue speeds predict my daily output?

No. Print mode, artwork coverage, substrate, handling and finishing affect a real workflow. Ask for a documented sample job with mode, resolution, material and elapsed time rather than treating a catalogue maximum as a guaranteed output.

Colibri Technics editorial purchasing guidance · 16 October 2026. Based on the published catalogue; not a technical sign-off or an operating manual.

Models and specification sources

  • 1325G6 Pro Series — specification download on the model page
  • ULTIMA R620 — specification download on the model page
  • ULTIMA A2 — specification download on the model page
  • ULTIMA A3 — specification download on the model page
  • A3+ Sheet Cutter — specification download on the model page
  • CA-24 — request the current specification
  • DF-1260 — request the current specification
  • CTCL1610 — specification download on the model page
  • CTCL1309 — specification download on the model page
  • CTCL1008 — request the current specification
  • CTCL0604 — request the current specification
  • Marking 30 W — request the current specification
  • CTL1700H — specification download on the model page
  • CTL1700M — specification download on the model page
  • Auto Open 40 × 60 — specification download on the model page

Equipment enquiry

Tell us what you need.

Name, email and a message are required. Other contact details are optional.

Your draft stays in this tab while you browse. Nothing is sent automatically.

Add contact details optional

Your contact details and message are sent to Colibri Digital Limited (Colibri Technics) to answer your equipment enquiry and stored privately in our website administration. Nothing is sent until you press Send enquiry. For access, correction or deletion requests, contact [email protected]. Read the privacy information.

Privacy information

Who handles your information

Colibri Technics is operated by Colibri Digital Limited, company number 2875806 registered in the Hong Kong Companies Registry. Registered address: Suite A, 11/F, Ritz Plaza, 122 Austin Road, Tsim Sha Tsui, Kowloon, Hong Kong.

For privacy questions and requests, contact [email protected].

Equipment enquiries

We use the details you send to answer your equipment enquiry, prepare a quotation where requested and follow up. Name, email and message are required to send the form; phone, company and country are optional. Without the required details we cannot receive and answer the form. Please do not include sensitive personal information in your message.

We retain the submitted details, selected equipment, submission time, enquiry reference, privacy-notice version and subsequent handling notes or status. Enquiries are stored privately in the website administration, not published or used to subscribe you to marketing. The form does not automatically forward your enquiry to email or a CRM. Our authorised employees may use company email and our CRM when handling and following up your enquiry.

Where data protection law applies, requested steps towards a contract are a basis for handling an enquiry; otherwise we rely on our legitimate interests in answering business correspondence, maintaining records and protecting the website. The required privacy checkbox acknowledges this notice; it is not a marketing subscription. We do not use the enquiry form for profiling or automated decisions that produce legal or similarly significant effects. Automatic anti-spam and rate-limit checks help protect the form.

Service providers and processing locations

The WordPress website is hosted through UAB Interneto vizija (IV), Lithuania, on inspe.hostingas.lt. Cloudflare provides the website's network delivery and security services. Hosting and network providers may process network addresses, request details, security logs and backups to deliver, protect and recover the service. Company email and CRM providers may also process correspondence handled by our employees.

Our employees handling enquiries work in Hong Kong, Lithuania and Israel. Service providers may process data in other countries as part of their services; the level of legal protection can differ between countries. Contact us for information about processing locations and the transfer arrangements relevant to your enquiry. See the providers' information: IV data processing agreement and Cloudflare privacy policy.

How long information is kept

We keep enquiry records while they are needed to answer and follow up your request, handle an ongoing transaction, meet a legal obligation or resolve a dispute. Administrators review and remove records manually when they are no longer needed; this WordPress site has no automatic expiry scheduler or fixed deletion deadline. Unnecessary handling is restricted where a record must be retained for a specific purpose.

Technical logs and backups have separate retention determined by security, recovery needs, applicable obligations and the provider's settings. Removing a live enquiry does not automatically remove copies from existing backups. Contact us for requests concerning those copies or for the retention information relevant to your enquiry.

Your choices and rights

You can ask for access to your information, correction, deletion, restriction of processing, or object to processing, and request a portable copy where the applicable law provides these rights. If processing relies on consent, you may withdraw it without affecting earlier lawful processing. You may also complain to your competent data protection authority.

Send requests to [email protected], preferably from the address used for the enquiry and with its reference. We may need proportionate information to verify that a request concerns your own data. We respond within the deadlines required by applicable law and explain any lawful exception or extension.

Browser drafts and external links

The enquiry draft and retry identifier remain in session storage in this browser tab until cleared or successfully sent; nothing is submitted automatically. Closing the tab ends its normal session storage, although browser session recovery may restore it. Use Clear draft on a shared device. The Cookies & drafts notice in the website footer explains browser storage in more detail.

Links to WhatsApp, Colibri Digital and other external websites open their respective services. Their own privacy information applies when you use them.

Website performance measurements

The public website uses Cloudflare Web Analytics real-user measurements (RUM) to understand page delivery and performance. The measurement service is separate from enquiry records and is not an advertising or remarketing subscription. See Cloudflare Web Analytics information and the provider privacy policy above. We do not claim that the public website has no analytics.

Trademarks and third-party brands

All trademarks, service marks, logos, brand names, trade names, product names, images, and other proprietary designations appearing on this website are the property of their respective owners.

References to third-party brands, manufacturers, products, or trademarks are made solely for identification, informational, compatibility, comparison, or descriptive purposes.

Unless expressly stated otherwise, the use of any third-party trademark or brand name does not indicate or imply any affiliation with, authorization by, sponsorship by, endorsement by, or official relationship with the respective trademark owner.

All rights in such trademarks, logos, and brand names remain with their respective owners.