
1325G6 Pro Series
An industrial LED-UV flatbed platform engineered for dependable high-output production.
- Up to 83 m²/h
- 2,440 × 1,120 mm print area
The equipment range
Printing, cutting and finishing. Find the right Colibri system for the way you work.
4 systems
Industrial LED-UV flatbed and automated direct-to-film systems for high-output production.

An industrial LED-UV flatbed platform engineered for dependable high-output production.

A 600 mm automated DTF production line built for higher-volume garment decoration.

A 430 mm automated DTF system for compact, dependable transfer production.

A compact high-production DTF printer with an integrated print-and-dry workflow.
3 systems
Sheet, contour, and roll-fed cutting systems for labels, signs, and print finishing.

A dual-head, auto-feeding sheet cutter for efficient short-run label finishing.

A camera-guided contour cutter for precise roll-fed print-and-cut production.

A wide-format industrial cutting plotter engineered for accurate, quiet production.
5 systems
CO₂ cutting, engraving, and marking platforms for non-metal production materials.

A 1600 × 1000 mm production laser with camera, projector, and lifting platform.

A 1300 × 900 mm production laser with camera-guided cutting and engraving.

A 1000 × 800 mm industrial laser platform for non-metal cutting and engraving.

A compact 600 × 400 mm laser system with production-grade positioning equipment.

A compact 30 W marking platform for personalised and industrial identification work.
2 systems
Wide-format heated laminators for protected, production-ready graphics.
1 system
High-pressure transfer equipment for dependable garment and textile finishing.
Printing systems
An industrial LED-UV flatbed platform engineered for dependable high-output production.
The 1325G6 Pro Series is an industrial LED-UV flatbed printer built around Ricoh Gen6 printheads and a linear-motor motion system. The retained configuration provides a maximum 2,440 × 1,120 mm print area, supports up to ten printheads, and reaches output up to 83 m²/h.
Confirm voltage, options and final installation requirements with the technical team.
This LED-UV flatbed platform is intended for flatbed print production. Check the actual substrate, usable print area, approved material height and the ink/curing combination against the intended application.
Published maxima are configuration-dependent; they do not describe every material, print mode or daily job.
The published specification lists Colibri Digital 5805 (Rigid) and 5105 (Super Flexible) ink series. Confirm the approved ink and cleaning-fluid codes for your installed configuration; this is not approval to mix inks. Request the applicable operating/maintenance manual before use.
PDF · 16.11 MiB · English-language reference; revision not established; confirm before use. Product information, not a complete installation or maintenance manual.
Editorial source/context review: 16 October 2026. This date is not manufacturer approval. Confirm document revision and supplied configuration. Website planning notes are not operating instructions.
Printing systems
A 600 mm automated DTF production line built for higher-volume garment decoration.
The R620 integrates printing, powder application, shaking, and intelligent heating into one continuous workflow. Humidification, automatic cleaning, built-in filtration, white-ink circulation, electric pinch rollers, tension control, and powder management reduce repetitive operator intervention.
Confirm voltage, options and final installation requirements with the technical team.
DTF produces a transfer on PET film which is finished through powder application and curing, then applied to the garment with a suitable heat press. Check the complete workflow and target fabric, not only printer width.
| Configuration | Passes | Resolution (dpi) | Speed (m²/h) |
|---|---|---|---|
| R622 · 2 × i3200 A1 | 4 | 360 × 1800 | 12 |
| R622 · 2 × i3200 A1 | 6 | 720 × 1200 | 9 |
| R624 · 4 × i3200 A1 | 4 | 360 × 1800 | 24 |
| R624 · 4 × i3200 A1 | 6 | 720 × 1200 | 18 |
Source: DTF ULTIMA R620 2025 specification, page 4. The document lists R622 and R624 separately. Confirm which configuration is offered; the R624 maximum must not be applied to R622.
Confirm the approved ink, PET film, powder and cleaning fluids for this exact configuration, together with the white-ink and filter maintenance instructions. A product-family name alone is not a compatibility approval.
PDF · 10.75 MiB · English-language reference; 2025 edition; confirm the supplied revision. Product information, not a complete installation or maintenance manual.
Editorial source/context review: 16 October 2026. This date is not manufacturer approval. Confirm document revision and supplied configuration. Website planning notes are not operating instructions.
Printing systems
A 430 mm automated DTF system for compact, dependable transfer production.
The ULTIMA A2 combines a direct-to-film printer with powder shaking and double-row intelligent drying. Automatic cleaning, built-in filtration, white-ink circulation and stirring, electric pinch rollers, a tension bar, and powder control support ready-to-transfer output on cotton, polyester, leather, nylon, and other light or dark garments.
Confirm voltage, options and final installation requirements with the technical team.
DTF produces a transfer on PET film which is finished through powder application and curing, then applied to the garment with a suitable heat press. Check the complete workflow and target fabric, not only printer width.
| Configuration | Passes | Resolution (dpi) | Speed (m²/h) |
|---|---|---|---|
| A2 · 2 × i1600 | 6 | 720 × 900 | 8 |
| A2 · 2 × i1600 | 8 | 720 × 1200 | 6 |
Source: DTF ULTIMA A2 2025 specification, page 4. These are area-production modes in m²/h, not linear metres per hour.
Confirm the approved ink, PET film, powder and cleaning fluids for this exact configuration, together with the white-ink and filter maintenance instructions. A product-family name alone is not a compatibility approval.
PDF · 10.62 MiB · English-language reference; 2025 edition; confirm the supplied revision. Product information, not a complete installation or maintenance manual.
Editorial source/context review: 16 October 2026. This date is not manufacturer approval. Confirm document revision and supplied configuration. Website planning notes are not operating instructions.
Printing systems
A compact high-production DTF printer with an integrated print-and-dry workflow.
The ULTIMA A3 brings automated powder handling and intelligent heating to a compact production footprint. Humidification, automatic cleaning, filtration, white-ink circulation, electric pinch rollers, tension control, and powder management support consistent daily operation.
Confirm voltage, options and final installation requirements with the technical team.
DTF produces a transfer on PET film which is finished through powder application and curing, then applied to the garment with a suitable heat press. Check the complete workflow and target fabric, not only printer width.
Published maxima are configuration-dependent; they do not describe every material, print mode or daily job.
Confirm the approved ink, PET film, powder and cleaning fluids for this exact configuration, together with the white-ink and filter maintenance instructions. A product-family name alone is not a compatibility approval.
PDF · 4.55 MiB · English-language reference; revision not established; confirm before use. Product information, not a complete installation or maintenance manual.
Editorial source/context review: 16 October 2026. This date is not manufacturer approval. Confirm document revision and supplied configuration. Website planning notes are not operating instructions.
Cutting systems
A dual-head, auto-feeding sheet cutter for efficient short-run label finishing.
Real production footage
Machine overview, sheet feeding, contour cutting, kraft labels, UV DTF film, gold film and finished labels.
Video could not start. Use the player controls or open the video file.
A compact precision system for creasing, kiss-cut, full-cut, and die-cut work. The servo drive, two cutting heads, 1–150 sheet feeder, real CCD mark recognition, QR-assisted mixed-material workflow, 4.3-inch touchscreen, and USB, U-disk, network, and Wi-Fi connectivity support repeatable short-run label production.
Confirm voltage, options and final installation requirements with the technical team.
This sheet-fed system suits short-run label finishing. Check sheet format, registration marks, material and the cutting workflow against a sample job.
Published maxima are configuration-dependent; they do not describe every material, print mode or daily job.
Use the approved model-specific operating instructions for maintenance, consumables and replacement parts. Request the correct document if it is not published; do not apply a procedure from a similar machine.
PDF · 6.89 MiB · English-language reference; revision not established; confirm before use. Product information, not a complete installation or maintenance manual.
Editorial source/context review: 16 October 2026. This date is not manufacturer approval. Confirm document revision and supplied configuration. Website planning notes are not operating instructions.
Cutting systems
A camera-guided contour cutter for precise roll-fed print-and-cut production.
The CA-24 combines automatic camera registration with a 4.3-inch HD touch screen, Wi-Fi, USB offline operation, and phone-app support for repeatable contour cutting and batch work.
Confirm voltage, options and final installation requirements with the technical team.
This roll-fed cutting system should be matched to working width, registration workflow, material and supported software. Maximum carriage speed is not finished-job throughput.
Published maxima are configuration-dependent; they do not describe every material, print mode or daily job.
Use the approved model-specific operating instructions for maintenance, consumables and replacement parts. Request the correct document if it is not published; do not apply a procedure from a similar machine.
A model-specific PDF is not currently published. Request the correct document and revision from the technical team; a similar model’s manual is not a substitute.
Editorial source/context review: 16 October 2026. This date is not manufacturer approval. Confirm document revision and supplied configuration. Website planning notes are not operating instructions.
Cutting systems
A wide-format industrial cutting plotter engineered for accurate, quiet production.
The DF-1260 combines a silent drive, digitally adjustable pressure, and fine step resolution for dependable sign, graphic, and transfer-media cutting in demanding workshops.
Confirm voltage, options and final installation requirements with the technical team.
This roll-fed cutting system should be matched to working width, registration workflow, material and supported software. Maximum carriage speed is not finished-job throughput.
Published maxima are configuration-dependent; they do not describe every material, print mode or daily job.
Use the approved model-specific operating instructions for maintenance, consumables and replacement parts. Request the correct document if it is not published; do not apply a procedure from a similar machine.
A model-specific PDF is not currently published. Request the correct document and revision from the technical team; a similar model’s manual is not a substitute.
Editorial source/context review: 16 October 2026. This date is not manufacturer approval. Confirm document revision and supplied configuration. Website planning notes are not operating instructions.
Laser systems
A 1600 × 1000 mm production laser with camera, projector, and lifting platform.
The largest CTCL platform is configured for cutting and engraving non-metal materials including wood, paper, leather, textiles, PMMA, acrylic, plastic, rubber, bamboo, decals, and other production substrates.
Confirm voltage, options and final installation requirements with the technical team.
Match the laser source, power, bed size and auxiliary equipment to a technically approved material and sample job. A generic material label is not approval for every composition or thickness.
Published maxima are configuration-dependent; they do not describe every material, print mode or daily job.
Use the approved model-specific operating instructions for maintenance, consumables and replacement parts. Request the correct document if it is not published; do not apply a procedure from a similar machine.
PDF · 0.38 MiB · English-language reference; revision not established; confirm before use. Product information, not a complete installation or maintenance manual.
Editorial source/context review: 16 October 2026. This date is not manufacturer approval. Confirm document revision and supplied configuration. Website planning notes are not operating instructions.
Laser systems
A 1300 × 900 mm production laser with camera-guided cutting and engraving.
The CTCL1309 balances a substantial working area with camera and projector assistance for non-metal production materials such as textiles, acrylic, wood, leather, paper, plastic, rubber, and bamboo.
Confirm voltage, options and final installation requirements with the technical team.
Match the laser source, power, bed size and auxiliary equipment to a technically approved material and sample job. A generic material label is not approval for every composition or thickness.
Published maxima are configuration-dependent; they do not describe every material, print mode or daily job.
Use the approved model-specific operating instructions for maintenance, consumables and replacement parts. Request the correct document if it is not published; do not apply a procedure from a similar machine.
PDF · 0.39 MiB · English-language reference; revision not established; confirm before use. Product information, not a complete installation or maintenance manual.
Editorial source/context review: 16 October 2026. This date is not manufacturer approval. Confirm document revision and supplied configuration. Website planning notes are not operating instructions.
Laser systems
A 1000 × 800 mm industrial laser platform for non-metal cutting and engraving.
The CTCL1008 combines a practical mid-size bed with camera, projector, and lifting functions for detailed work across wood, paper, leather, garments, acrylic, plastic, rubber, bamboo, and related materials.
Confirm voltage, options and final installation requirements with the technical team.
Match the laser source, power, bed size and auxiliary equipment to a technically approved material and sample job. A generic material label is not approval for every composition or thickness.
Published maxima are configuration-dependent; they do not describe every material, print mode or daily job.
Use the approved model-specific operating instructions for maintenance, consumables and replacement parts. Request the correct document if it is not published; do not apply a procedure from a similar machine.
A model-specific PDF is not currently published. Request the correct document and revision from the technical team; a similar model’s manual is not a substitute.
Editorial source/context review: 16 October 2026. This date is not manufacturer approval. Confirm document revision and supplied configuration. Website planning notes are not operating instructions.
Laser systems
A compact 600 × 400 mm laser system with production-grade positioning equipment.
The CTCL0604 brings the CTCL camera, projector, and lifting-platform configuration to a compact footprint for wood, paper, leather, textiles, acrylic, plastic, rubber, bamboo, and other non-metal materials.
Confirm voltage, options and final installation requirements with the technical team.
Match the laser source, power, bed size and auxiliary equipment to a technically approved material and sample job. A generic material label is not approval for every composition or thickness.
Published maxima are configuration-dependent; they do not describe every material, print mode or daily job.
Use the approved model-specific operating instructions for maintenance, consumables and replacement parts. Request the correct document if it is not published; do not apply a procedure from a similar machine.
A model-specific PDF is not currently published. Request the correct document and revision from the technical team; a similar model’s manual is not a substitute.
Editorial source/context review: 16 October 2026. This date is not manufacturer approval. Confirm document revision and supplied configuration. Website planning notes are not operating instructions.
Laser systems
A compact 30 W marking platform for personalised and industrial identification work.
The Colibri marking system is intended for leather, fibres, arts and crafts, packaging, greeting cards, cables, and other detailed marking applications in a compact production footprint.
Confirm voltage, options and final installation requirements with the technical team.
Match the laser source, power, bed size and auxiliary equipment to a technically approved material and sample job. A generic material label is not approval for every composition or thickness.
Published maxima are configuration-dependent; they do not describe every material, print mode or daily job.
Use the approved model-specific operating instructions for maintenance, consumables and replacement parts. Request the correct document if it is not published; do not apply a procedure from a similar machine.
A model-specific PDF is not currently published. Request the correct document and revision from the technical team; a similar model’s manual is not a substitute.
Editorial source/context review: 16 October 2026. This date is not manufacturer approval. Confirm document revision and supplied configuration. Website planning notes are not operating instructions.
Laminating systems
A pneumatic, heated 1630 mm laminator with integrated cutting for high-throughput finishing.
Real production footage
A demonstration of the CTL1700H laminating process.
Video could not start. Use the player controls or open the video file.
The CTL1700H is a full-automatic industrial laminator with pneumatic lift, infrared heating, and cutting. It supports hot and cold work, adjustable speed, nip gap, and pressure, and footswitch operation from either side. Its 20 m/min maximum speed and 28 mm media clearance are intended for demanding wide-format finishing.
Confirm voltage, options and final installation requirements with the technical team.
Use a wide-format heated laminator for finishing compatible printed graphics. Compare the feeding method, material limits, working width and required cutting workflow before selecting H or M.
Published maxima are configuration-dependent; they do not describe every material, print mode or daily job.
Use the approved model-specific operating instructions for maintenance, consumables and replacement parts. Request the correct document if it is not published; do not apply a procedure from a similar machine.
PDF · 1.48 MiB · English-language reference; revision not established; confirm before use. Read with the supplied machine-specific instructions.
Editorial source/context review: 16 October 2026. This date is not manufacturer approval. Confirm document revision and supplied configuration. Website planning notes are not operating instructions.
Laminating systems
A semi-automatic heated laminator for dependable 1630 mm graphic finishing.
The CTL1700M combines infrared heating up to 60°C with a hand-crank lift. It supports hot and cold work, manual nip-gap and pressure adjustment, 130 mm silicone rollers, auto-locking exchangeable roll shafts, and footswitch operation from either side. It handles media up to 23 mm thick at speeds up to 12 m/min.
Confirm voltage, options and final installation requirements with the technical team.
Use a wide-format heated laminator for finishing compatible printed graphics. Compare the feeding method, material limits, working width and required cutting workflow before selecting H or M.
Published maxima are configuration-dependent; they do not describe every material, print mode or daily job.
Use the approved model-specific operating instructions for maintenance, consumables and replacement parts. Request the correct document if it is not published; do not apply a procedure from a similar machine.
PDF · 1.13 MiB · English-language reference; revision not established; confirm before use. Read with the supplied machine-specific instructions.
Editorial source/context review: 16 October 2026. This date is not manufacturer approval. Confirm document revision and supplied configuration. Website planning notes are not operating instructions.
Heat transfer presses
A dual-core, auto-opening heat press with independent upper and lower heating modes.
Real production footage
An edited demonstration of garment positioning, pressing, transfer peeling and the finished print.
Video could not start. Use the player controls or open the video file.
This high-pressure 40 × 60 cm press supports both plates, upper-only, or lower-only heating. Its 70-degree opening, LED controller, and automatic release are designed for repeatable transfer work.
Confirm voltage, options and final installation requirements with the technical team.
Use the heat press as the transfer stage of an approved garment-decoration process. Confirm platen format, transfer/fabric compatibility and the supplied upper/lower heating configuration.
Published maxima are configuration-dependent; they do not describe every material, print mode or daily job.
Use the approved model-specific operating instructions for maintenance, consumables and replacement parts. Request the correct document if it is not published; do not apply a procedure from a similar machine.
PDF · 4.91 MiB · English-language reference; revision not established; confirm before use. Product information, not a complete installation or maintenance manual.
Editorial source/context review: 16 October 2026. This date is not manufacturer approval. Confirm document revision and supplied configuration. Website planning notes are not operating instructions.