Cutting systems
A3+ Sheet Cutter
A dual-head, auto-feeding sheet cutter for efficient short-run label finishing.
Production demonstrations
Sheet cutting in action
Machine overview, sheet feeding, contour cutting, kraft labels, UV DTF film, gold film and finished labels.
Kraft paper labels
Close-up demonstration of contour cutting printed labels on kraft paper.
UV DTF film
The cutting head follows the printed designs on a sheet of UV DTF film.
Gold film and finished labels
Gold film being cut, followed by the finished contour-cut labels.
Full cutting demonstration
The complete original demonstration of sheet feeding and contour cutting.
- 1–150 sheet feeder
- Dual cutting heads
- Real CCD mark recognition
- QR-assisted mixed-material cutting
- 4.3-inch touchscreen
- USB, U-disk, network, and Wi-Fi
- 1600 mm/s maximum speed
- Up to 400 gsm media
Overview
A compact precision system for creasing, kiss-cut, full-cut, and die-cut work. The servo drive, two cutting heads, 1–150 sheet feeder, real CCD mark recognition, QR-assisted mixed-material workflow, 4.3-inch touchscreen, and USB, U-disk, network, and Wi-Fi connectivity support repeatable short-run label production.
Applications
- Sheet labels
- Packaging prototypes
- Kiss cutting
- Short-run finishing
Technical specifications
- Maximum media width
- 370 mm
- Maximum cutting width
- 360 mm
- Automatic feeding
- 1–150 sheets
- Cutting precision
- 0.01 mm
- Repeat precision
- 0.082 mm
- Maximum speed
- 1600 mm/s
- Maximum force
- 2000 g
- Blade heads
- 2
- Media thickness
- Up to 1 mm / 400 gsm
- Software
- CorelDRAW, Adobe Illustrator, CameraCut
- Registration
- Real CCD mark-recognition system
- Control
- 4.3-inch touchscreen
- Connectivity
- USB, U-disk, network cable, Wi-Fi
- Power consumption
- <100 W
Confirm voltage, options and final installation requirements with the technical team.
Choosing this system
This sheet-fed system suits short-run label finishing. Check sheet format, registration marks, material and the cutting workflow against a sample job.
Published maxima are configuration-dependent; they do not describe every material, print mode or daily job.
Planning your installation
- Confirm assembled dimensions and access for delivery, operation and maintenance.
- Confirm the supplied electrical configuration and each separately powered accessory.
- Ask for the applicable installation instructions and revision before preparing the site.
Confirm your supplied configuration
- Your quotation should identify the exact model and revision, with equipment marked as included, optional or customer-supplied.
Consumables & maintenance
Use the approved model-specific operating instructions for maintenance, consumables and replacement parts. Request the correct document if it is not published; do not apply a procedure from a similar machine.
Documentation & source status
A3+ Sheet Cutter — specification / presentation PDFPDF · 6.89 MiB · English-language reference; revision not established; confirm before use. Product information, not a complete installation or maintenance manual.
Editorial source/context review: 16 October 2026. This date is not manufacturer approval. Confirm document revision and supplied configuration. Website planning notes are not operating instructions.